+ Reply to Thread
Results 1 to 4 of 4

Thread: Harpoon Gun Blanks

  1. #1
    Weaky wacker 336paulm's Avatar
    Join Date
    Aug 2008
    Location
    K-Vegas N.C.
    Posts
    28
    Home Port
    Morehead City
    Occupation
    Firefighter

    Question Harpoon Gun Blanks

    Is there anyone out there that is making modern blanks for the Greener Harpoon Gun, It is a 38 necked down blank that my gun shoots, if not could someone give me the specs for reloading the old ones ?

  2. #2
    I think Admin is going to let me have this space nautiduck's Avatar
    Join Date
    Apr 2008
    Location
    Rock Hill SC (Charlotte)
    Posts
    1,551
    Best Catch
    Duckie
    They arent necked down (that means the case goes to a smaller diameter), They are crimped down and waxed (just to close the front end).38 special blank. I have seen them made by Kynoch. Im not sure of the powder charge but it is a high power cartridge. You could try reg .38 spl blanks which you can buy from any good gun shop, but they may not be powerful enough.

  3. #3
    I think Admin is going to let me have this space nautiduck's Avatar
    Join Date
    Apr 2008
    Location
    Rock Hill SC (Charlotte)
    Posts
    1,551
    Best Catch
    Duckie
    I found the necked down version sorry about that I had never seen that version before only the straight Kynoch cartridge. Does this look familiar? Its a 14 gr powder charge if you have old cartridges you would have to get a die set made but that isnt to hard. I dont know if I would have it bored out as you mentioned in your PM. Those guns seem to be worth quite a bit. Plus from my research they used a large grain powder to slow the burn to get the heavy harpoon moving correctly. Running modern blanks with fast burn powder may be OK but they may not and they may not have the correct powder charge. The original cartridge was produced by the Kynoch Factories of Imperial Chemical Industries Limited, Metals Division, Witton, Birmingham, England for W.W. Greener LTD. Gun, Rifle, and Cartridge Makers London and Birmingham. I hope this helps the company may still be in business and may have the information you need.
    Attached Thumbnails Attached Thumbnails Harpoon Gun Blanks-04-91cartridges.jpg  

    Last edited by nautiduck; 03-13-2009 at 07:57 PM.

  4. #4
    I think Admin is going to let me have this space Flatdog's Avatar
    Join Date
    Mar 2007
    Location
    London England
    Posts
    1,091
    Boat
    Fallen in love with Rock Salt 45
    Best Catch
    210lb Piraiba cat fish rio de morte brazil Amazon delta
    Occupation
    At the moment sales
    I assume that you run these in a block that runs into the chamber? try any good movie or theater supplier, these are normally used on set or back stage, you are certain that it is .38spl not .38s&w blanks? If it is .38spl then use .357 cases with the crimping and necking it will not matter that they are a ball hair longer, and you will get more shots per case, from that brass. Will rcbs not make you dies?? If you do nothing else e mail the DUDES www.wwgreener.com/index.html
    They will tell all and shame the devil

+ Reply to Thread
Buy GoPro HERO Camera at GoPro.com



Content Relevant URLs by vBSEO 3.6.0 PL2