Everything Must Go!!!!!!!!!!!!

[neilinov]

Any one out there remodeling their house. Give me a call. I have a whole warehouse full of stuff I need to get rid of. There is everything you need to build a house in there from Andersen Windows and doors of all sizes and shapes, toilets, tubs, appliances, flooring, vinyl rails, siding, decking, light fixtures. You name it it is in there. A lot of high end plumbing fixtures by Grohe, Dornbracht, and French names you never even heard of. Recessed lights, chandeliers, light switches, dimmers, timers and everything in between. There are interior doors of all sizes. Most of them are solid hardwood cherry, mahogany, and maple. There is raw stock of Zebra wood, Wenge, Mahogany, Cherry, Teak, and Ipe. Give me a call at (302) 462 6196 to see if I have anything that you may want.

Neil

[flatbottom]

neilinov, are the doors flush or raised panel. I am looking for hardwoods to turn on a lathe. dimensions 2.50 square to 2.00 square. If the doors are flush with no veneer I can rip them down. My father in law turns hardwoods for woodwind instruments, supplying the discreet professionals locally, specifically the parts holding the reeds. The denser the wood the better the tones achieved. What is the zebra wood in comparison to say, a blood wood ? thanks neilinov for posingt this

[Captain Jay Kavanagh]

Where were you 4 months ago.

Bought 4 pellas and anderson patio door.

[neilinov]

neilinov, are the doors flush or raised panel. I am looking for hardwoods to turn on a lathe. dimensions 2.50 square to 2.00 square. If the doors are flush with no veneer I can rip them down. My father in law turns hardwoods for woodwind instruments, supplying the discreet professionals locally, specifically the parts holding the reeds. The denser the wood the better the tones achieved. What is the zebra wood in comparison to say, a blood wood ? thanks neilinov for posingt this

Flat:
I have some raised panel and some flush doors. Let me know what you are want and I can either take some photos or give you a description. The Zebra wood probably isn't something you want to deal with. It is real hard to finish, because the grain of the wood goes in different directions. It is striped, like a zebra. One grain of white then one grain of black. Real cool looking stuff once you get it finished. We built a staircase out of it and it looks awesome. The wenge is super hard it is probably one of the most dense woods there is out there. We went through lots and lots of sawblades working with this stuff. It is a real dark wood almost black. I think the only darker wood is ebony. If you have any questions give me a call.
Neil

[joeksr]

I'm looking for some windows, storm doors, shower stall, and bathroom base cabinet. Not sure of sizes but will measure next weekend if you have any of these.

Joe.

[flatbottom]

Thanks neilinov. Just what I was hoping for. ......I will give you a call tomorrow

flat

[neilinov]

I've got a lot of windows they are all andersen, sliders, french doors, storm doors. I don't know if there is a shower stall in there, but there might be. I know there is a brand new jacuzzi tub, sinks, faucets, some cabinets, wine cooler, some other appliances, garbage disposals. Just let me know what you want and the sizes. I'll see if I have it.

The stuff is going fast, so if you need something let me know I will hold it for SFC members.

[heavy389]

What demensions are the zebra wood in???

[neilinov]

What demensions are the zebra wood in???

It's all raw stock. If you want it in any dimension I can mill it for you. The thickest I can mill however is 5/4. I don't have any stock any thicker than 1 1/2" We have planks that are over 16" wide and the lengths are up to 16'

[joeksr]

I've got a lot of windows they are all andersen, sliders, french doors, storm doors. I don't know if there is a shower stall in there, but there might be. I know there is a brand new jacuzzi tub, sinks, faucets, some cabinets, wine cooler, some other appliances, garbage disposals. Just let me know what you want and the sizes. I'll see if I have it.

The stuff is going fast, so if you need something let me know I will hold it for SFC members.

I'll call you tomorrow. jacuzzi tub, sink, garbage disposal are also on my list. A wine cooler wont hurt either .
talk to you tomorrow.

My brother does a lot of woodworking. I'll try to get hold of him to see if he can use any of what you have.
thanks
Joe