33 Concorde Custom twin diesel sportfish

[taggteam]

Priorities have changed and she's going up for sale at reduced, no bull, as she sits price....say that three times fast.

33 Concorde....amazing offshore hull....HEAVY boat.
I've been in some nasty stuff in this boat and she takes it like no other boat in the size class. Like riding in a 72 Caddilac. 33 foot Concorde Hull....if it were measured by todays standards, she'd be 38ft.....pulpit to trim tabs...so it's 33 foot of fiberglass in the water.
Ok...enough of the sales pitch. Here are some details.
33' hull....13'6" beam.
Huge cockpit.
Hull was Awlgripped in 2006....fighting lady yellow w/ forrest freen bootstripe.
Interior was torn out and all is new in salon. tons of pics...all solid mahogany personally built by me with spankin new upholstery.
New Stainless fridge, sink, mircowave, carpet.
New 4.5K Kohler Diesel Genset...might have 20 hours on it.
Recent repower (roughly 600 hours as a conservative extimate)8.2 liter turbo intercooled 300 HP Detroit diesels....cruise the boat at an honest 24-26 knots. Top out at 29 knots. Cruise to the Baltimore from Cape May, troll all day and back on 150 gallons of fuel.

Boat is 80% completed. Needs topsides painted and halftower reinstalled or replaced, electronics re-installed.

Issues:
Hardtop was removed to transport boat to my home...as was the half tower. Have it all, along with the overhead electronics box.....but was planning on going new. The old stuff is weathered a bit.
Starboard engine mount is cracked. I'd suggest lifting the engine and rebedding with new steel....but I have the mounts.
all electronics have been removed from the boat....I've got an ICOM M127 radio
Raytheon V850 color sounder
Raytheon GPS which makes the V-850 a color pliotter with cartridges
And a 10.5" standard Horizon Color
WAAS GPS that all go with the boat.

Details not to miss
I've got a pair of disassembled 8.2 parts engines..complete from oil pan to turbos that go with the boat. You could literally run the boat and have parts for ten years with the parts engines that go with it.

Also have a 4.5KW Kohler minus the generator end for parts...but the one installed is spankin new. (engine on genset is 2 cylinder 2GM Yanmar). The end went on it and rather than replacing the end, I found a new, old stock same Genset...so just replaced it....engine ran perfectly.

I've got a ton of pictures of the boat...just ask. Located in Franklinville NJ....08322.

Email
taggteam@comcast.net

[Fritz]

Carmen has worked his butt off restoring this classic. Good luck with the Carmen. How about you post a price and pics for the fellas?

[Bill_N]

pics? price?

[taggteam]

Price is a no bull....as is, where is 47K

[CaptainSteve]

at that price it will go quick

[taggteam]

It should...I've got mixed feelings about selling it...a lot of good times on that boat.... she's a tank.

[taggteam]

back up to the top...

[taggteam]

Thank you Sir...sure someone would love her as much as I have.

Not sure what you mean about Ricky working on it...

[taggteam]

back up to the top...this is a great boat fellas...

[sportfishingusa]

If i only had contact down in mexico.. this looks like it would be an awesome southern fishing boat!!!


Open bridge, nice color would fit in well in cabo!

Maybe i could send it to puerto rico to do some serious fishing!! man that is a beautiful boat! you did an awesome job on the restore!!