I want to thank Vin McCarthy (Seaker) for saving me and many others hours and hours of work by bringing this issue to my attention. (and trouble shooting his GPS so I could learn from his labor)
There is a new satellite up in the heavens. Satellite number 32.... Unfortunately, Northstar 94x, 95x and 96x with software older than 2003 can only understand satellites 1 through 31. When satellite 32 comes into range, the Northstar loses its fix and starts doing really strange thing, like not changing your position or showing you running at 300 knots or just flashing the "!" symbol....
After speaking with Northstar last night, they said satellite 32 comes into range here in our area at around 3:15 pm and goes out of range at about 8:00 pm. Satellite 32 confuses the unit.
There is a free patch available on Northstar's web site. The tech told me that it will not over write my marks (I'd hate to lose my double secret 3 pound blue fish spot... )
I was going to include the link, the the address is longer than the Tech Pub. Here is the Tech Release:
Dear Northstar Customers, Dealers and Sales Representatives,
Several older generation Northstar products are potentially affected by the introduction of the new satellite PRN32 into the GPS constellation. This new satellite was activated 27th of February 2008. The internal GPS engine used by Northstar in these affected units may not recognize the new satellite which may cause the unit to operate incorrectly or fail when this satellite is in view. The affected GPS software versions were used in production from 1997-2003. These units are no longer covered under a warranty period.
It is recommended that users of the affected products check their current GPS RX software version (not the same as system software version) on the "Service" information menu accessed by using the star key. Note that units that have been serviced or upgraded may have newer software.
If the GPS software version is on the list shown below, then a software patch will need to be installed on the unit to remedy this issue.
Good heads up Parapapam. Thanks. Northstar updates are usually pretty easy to do but if you have any problems just contact Navico (Northstar) Customer Service at 800-628-4487 or check out downloads at www.northstarnav.com
LinkBack URL
About LinkBacks
Reply With Quote
