Need Transmission O-Rings

[costaricasportfishing]

Hey Guys. I need to find someone that sells parts for Transmissions. Before I go searching random.

[aprilfool]

you will need make model and serial number

[seapower]

What brand and type transmission do you have. Model# and serial#, aswell as gear ratio. What part's are you looking for? There are many places to get part's. Availability depend's on brand, model and age. Frank

[costaricasportfishing]

Twin Disc
Model MG5050A
Serial 5CA585
Ratio 1:53:1

Leaking seal/gasket/o-ring

Can I order a whole rebuild kit?

[Banshee]

which seal the forward one or rear one? I under stand the rear seal can be very very nasty two change.
Transmisson Engineering in Pa. or go to the Twins disc website and find one in FL.
Good luck.
JW

[aprilfool]

twin disc has a factory store in jacksonville if you are doing this yourself i would call and speak to them first and tell them what is going on with your gear, and also ask them for a service manual as well, they may be able to walk you through this whole thing

[costaricasportfishing]

I am not doing it. I just need to order the parts for the guy here. Please let me know where I can get this stuff.

[CaptD]

try palmer johnson ....fast shipping..

[costaricasportfishing]

No Luck. Any other ideas. This might be bad.

[seapower]

Better be careful, you got a guy doing the repair, that doesn't know where to get the part's? Where are you located? The part's for that transmission are readily available from Twin Disc (transmission engineering has a few shop's). Where is the leak coming from? You ask for "o" ring's, there are "o" ring's on the selector valve. Input and out put shaft have lip seal's. If you're replacing the output shaft seal on that gear, you'd better have an idea of what you're doing. Some of the flange's don't just come off by un-bolting, some are the same casting as the shaft itself and require the transmission to be broken down. Frank