inboard prop pullers?

[gameover]

I need to purchase an inboard prop puller, and I'm looking for input...

I have a 4 blade 18" wheel on an 1 1/2" shaft. The clearance between the wheel and the strut might be 3/4" at best.

I have used a buddies in the past, it was made in a machine shop. Im looking for a quality tool that I can count on.

The prop smith looks Ideal, but my prop is not tapped.

I also face a clearance issue with the rudder.

Thanks.
this is what im looking at:
Item description:
Walter Propeller Pullers quickly and safely remove propellers. For more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.

Walter Propeller Pullers simple design can be used underwater. Four sizes to suit nearly every 2 to 5 bladed propeller. Made of steel forgings and castings for maximum strength and toughness.

[54bullwinkle]

Made mine in an hour with some 1/4" flat stock, 1/2" drill and 5 bolts. PM me if you want to know how.