Go Back   Sport Fishing Forums > Boats, Motors & Electronics > Boating Forum > Marine Electronics Q&A and Discussion

Members Login




Credits: 0 [Check]

Reply
 
LinkBack Thread Tools Display Modes
Old 10-26-2009, 10:44 PM   #1
Administrator
 
Join Date: Oct 2009
Posts: 218
Credits: 2,197.1
Winters coming to the Northeast.

Keep your boat ice free all winter, With our products
http://www.sportfishermen.com/shop/outdoor/de-icers/
16202.gif de ice.jpg





* 1 HP energy efficient high quality motor
* 115 volt, 7.0 amps, one phase, 60/50 cycle
* 25 foot quick change power cord
* Two 25 foot x 3/8" hollow braided mooring lines with shackles
* Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8"
* Shipping weight 45 lbs
* For large boats, marinas and heavier uses
* Can be used in place of several smaller units
* Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
* Motor shaft is 316 stainless steel, the best material for salt water application
* Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
* Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
* Stator motor windings have double impregnation of baked insulating varnish
* Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
* Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
* Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
* Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
* Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
* Performance certified tested at our facility for proper output and leaks before shipment
* Best three year limited warranty in the marketplace
* Comes complete, just open the box, remove and install
* Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
Electronics Guru is offline   Reply With Quote
Reply

Thread Tools
Display Modes



All times are GMT -4. The time now is 06:24 AM.