Death from above/50wlrsa drag setting

Knot Tell'n · 06-03-2009, 05:53 PM

Curious as to a ball park drag setting for my planer rod. I typically pull a #8 planer at 6-8 kts.. I have never really gotten the feel for the initial drag setting. I usually go between strike and full on the reel and once hooked up go back to strike or a little less. This kind of luck can't last forever. Any formulas or ideas would be much appreciated.

markc · 06-05-2009, 10:47 AM

i have always been told to let the planer leak a little. i set my drag where its just at the strike line and lets the planer just leak out every once and a while.

Glenn W · 06-06-2009, 10:08 AM

8 kts on a planer is damn fast even on a little #8. In any event, it's really pretty simple: adjust your drag knob to the click where you lose absolute freespool, then back of a couple clicks--- you must have perfect free spool or the planer won't trip. As far as backing off the drag with a fish, you are correct in that this is very important as you will loose many a fish if you don't back off. I have found that the best way is to put a piece of tape where the lever should be to fight a fish. This way you don't have to worry abut going back too far and getting a hoora's nest.--- takes the guess work out of it. If you want the planer to creap or stay put--- it ain't exactly neurosurgery figuring this out.

06-03-2009, 05:53 PM	#1
Knot Tell'n #1 Lurker Join Date: Oct 2005 Posts: 3 Home Port: Little Creek, Va.	Death from above/50wlrsa drag setting Curious as to a ball park drag setting for my planer rod. I typically pull a #8 planer at 6-8 kts.. I have never really gotten the feel for the initial drag setting. I usually go between strike and full on the reel and once hooked up go back to strike or a little less. This kind of luck can't last forever. Any formulas or ideas would be much appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2009, 10:47 AM	#2
markc Hide- My Wifes Logged On Join Date: Mar 2009 Location: Wilmington, NC Posts: 138 Boat: whoever wants to take me to the blue water Home Port: masonboro Occupation: hydrographic surveyor	i have always been told to let the planer leak a little. i set my drag where its just at the strike line and lets the planer just leak out every once and a while.

06-06-2009, 10:08 AM	#3
Glenn W Motor Mouth Mega Poster Join Date: Jan 2005 Location: Richmond, Va Posts: 4,120 Occupation: Moonbat	8 kts on a planer is damn fast even on a little #8. In any event, it's really pretty simple: adjust your drag knob to the click where you lose absolute freespool, then back of a couple clicks--- you must have perfect free spool or the planer won't trip. As far as backing off the drag with a fish, you are correct in that this is very important as you will loose many a fish if you don't back off. I have found that the best way is to put a piece of tape where the lever should be to fight a fish. This way you don't have to worry abut going back too far and getting a hoora's nest.--- takes the guess work out of it. If you want the planer to creap or stay put--- it ain't exactly neurosurgery figuring this out.