Avet and Pac Bay??

witchdoctor · 06-09-2008, 07:41 PM

I just got a couple of Avet Pro ex 4/0 wides to mount on Chaos ECL 50-100 rods. The rods use Pac Bay aluminum butts. When i tighten down the collars the threads stop before it gets tight on the reel. Anyone ever have this happen with avet? My TLDs fit perfect....

Thanks

gradywhite273 · 06-09-2008, 07:51 PM

hey witch, never heard of that before, are the pacs unibutts, if so , you may try an aftco unibutt and see how they seat on them ,

witchdoctor · 06-09-2008, 08:05 PM

its a 2 piece, like this..

http://www.chaosfishing.com/rods_det...sp?prod_id=107

wrap-check · 06-09-2008, 09:26 PM

I had it happen too -- the reel seats on those avets are really short and alot of rods won't tighten down on them. I think this is one of the reasons they discontinued the exw's and came out with the 30w.

I called Avet to see if they made a larger seat (I'm sure I wasn't the only one having the problem). To their credit, I got one of the owners on the phone, that said, the guy told me there was nothing they could do, the reels were fine, and I should buy new rods.

My response was something along the lines of penn wouldn't say that -- he freaked and after he hit me with some choice profanity (and I shot back) hung up on me.

Now that I ranted - here's how I solved it. I built up the reel seats with some soft lead sheets cut to fit -- roof flashing. They held in place very well - this will cause electrolysis in the long term, so it's really only a temporary fix.
Long term fix -- selling all my Avet stuff and upgrading to Fin-nor's.

Hope that helped.

-Jay

NightHeron · 06-09-2008, 11:55 PM

Call an avet rep because they can get the larger reel saddles.I contacted Tim hake he got them for me very fast they do make them an have them in stock. This was a problem from the start and they made larger saddles no problem

canyongear · 06-10-2008, 07:56 AM

No wonder the reel seats don't match the butts..PacBay made in..China? India? HongKong..who knows..I doubt Avet sent the schematics to one of those plants for compliance..sounds more like an Avet problem tho..my thought is buy American..keep the $$$ here.

Fish Poison Rods · 06-10-2008, 08:16 AM

Its the reel. A lot of Avets dont fit standard type seats. The will learn some day.

witchdoctor · 06-10-2008, 12:18 PM

Well, you are right its the reel. Avet says they fixed the problem with the new 30 wide. The lady at avet said they ran of a bunch of corrected rod mounts but are sold out of them.

I did find a part on Pac Bays site called a winding check,,, can i use this like a spacer or is it threaded ?

Thanks

witchdoctor · 06-10-2008, 12:46 PM

Quote:

Originally Posted by witchdoctor

Well, you are right its the reel. Avet says they fixed the problem with the new 30 wide. The lady at avet said they ran of a bunch of corrected rod mounts but are sold out of them.

I did find a part on Pac Bays site called a winding check,,, can i use this like a spacer or is it threaded ?

Thanks

Never mind on the Winding check,, answered my own dumb question

witchdoctor · 07-04-2008, 10:36 AM

Problem Solved! I called Avet and told them the problem. They had me send back the reel and put on a new bigger rod mount. All for free, and they even gave me an extra rod mount in the box. Im pretty happy with Avet right now! hanks for the help.

06-09-2008, 07:41 PM	#1
witchdoctor Pit Monkey First Class Join Date: Apr 2007 Posts: 21 Credits: 650.2	Avet and Pac Bay?? I just got a couple of Avet Pro ex 4/0 wides to mount on Chaos ECL 50-100 rods. The rods use Pac Bay aluminum butts. When i tighten down the collars the threads stop before it gets tight on the reel. Anyone ever have this happen with avet? My TLDs fit perfect.... Thanks

06-09-2008, 09:26 PM	#4
wrap-check Anthony's Ark is a blowboater Join Date: Oct 2006 Posts: 264 Credits: 2,699.2 Boat: 31' Duffy Home Port: Sandwich, Ma Occupation: Pharma Sales/ Charter Cpt - Mate	I had it happen too -- the reel seats on those avets are really short and alot of rods won't tighten down on them. I think this is one of the reasons they discontinued the exw's and came out with the 30w. I called Avet to see if they made a larger seat (I'm sure I wasn't the only one having the problem). To their credit, I got one of the owners on the phone, that said, the guy told me there was nothing they could do, the reels were fine, and I should buy new rods. My response was something along the lines of penn wouldn't say that -- he freaked and after he hit me with some choice profanity (and I shot back) hung up on me. Now that I ranted - here's how I solved it. I built up the reel seats with some soft lead sheets cut to fit -- roof flashing. They held in place very well - this will cause electrolysis in the long term, so it's really only a temporary fix. Long term fix -- selling all my Avet stuff and upgrading to Fin-nor's. Hope that helped. -Jay __________________ Cockpit Guerilla Laura-Jay Charters www.laurajay.com "I'm just happy to have my boat back" Last edited by wrap-check; 06-09-2008 at 09:28 PM.

06-09-2008, 11:55 PM	#5
NightHeron Weaky wacker Join Date: Jun 2007 Posts: 28 Credits: 661.9	Call an avet rep because they can get the larger reel saddles.I contacted Tim hake he got them for me very fast they do make them an have them in stock. This was a problem from the start and they made larger saddles no problem __________________ Nightheron

06-10-2008, 07:56 AM	#6
canyongear I just got squirted with ballyhoo poop Join Date: Feb 2008 Posts: 43 Credits: 608.4	Buy American No wonder the reel seats don't match the butts..PacBay made in..China? India? HongKong..who knows..I doubt Avet sent the schematics to one of those plants for compliance..sounds more like an Avet problem tho..my thought is buy American..keep the $$$ here.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2008, 08:05 PM	#3
witchdoctor Pit Monkey First Class Join Date: Apr 2007 Posts: 21 Credits: 650.2	its a 2 piece, like this.. http://www.chaosfishing.com/rods_det...sp?prod_id=107

06-10-2008, 08:16 AM	#7
Fish Poison Rods Weaky wacker Join Date: May 2008 Location: Point Pleasant N.J. Posts: 28 Credits: 622.0 Boat: Radio controlled Coast guard cutter Home Port: Manasquan River N.J. Best Catch: 3 kids, 2 grandkids Occupation: Custom Rod Builder	Its the reel. A lot of Avets dont fit standard type seats. The will learn some day.

06-10-2008, 12:18 PM	#8
witchdoctor Pit Monkey First Class Join Date: Apr 2007 Posts: 21 Credits: 650.2	Well, you are right its the reel. Avet says they fixed the problem with the new 30 wide. The lady at avet said they ran of a bunch of corrected rod mounts but are sold out of them. I did find a part on Pac Bays site called a winding check,,, can i use this like a spacer or is it threaded ? Thanks

07-04-2008, 10:36 AM	#10
witchdoctor Pit Monkey First Class Join Date: Apr 2007 Posts: 21 Credits: 650.2	Problem Solved! I called Avet and told them the problem. They had me send back the reel and put on a new bigger rod mount. All for free, and they even gave me an extra rod mount in the box. Im pretty happy with Avet right now! hanks for the help.