+ Reply to Thread
Results 1 to 9 of 9

Thread: Jigging - F.A.Q.

  1. #1
    www.easterntackle.com Sea Draggin's Avatar
    Join Date
    Feb 2005
    Location
    Ga
    Posts
    6,629
    Best Catch
    The next bite on a jig.

    Jigging - F.A.Q.

    I found this article. It was written on an Asian site over two years ago. There are so many "Pearls of Wisdom" in this article, that I wanted to repost it. Read it, Read it again, Then read it once more. Its solid gold. Whoever wrote it was very experienced and put a lot of thought into it.
    -Jim


    --------------------------------------------------------------------------

    Speed jigging, deep jigging, Japanese jigging, vertical jigging, extreme jigging, butterfly jigging, working the iron. These are some of the many names given to jigging with long jigs that has swept Asia, Oceania, Europe and now the US.

    Jigging is one of the world?s oldest lure fishing techniques. Its origins have been sketchy but it can be traced back to the early Polynesians and Europeans many centuries ago. So we know this type of artificial lure fishing works!

    During the early 1990?s, the Japanese reinvented jigging through the pioneering exploits of Yoichi Mogi. He was instrumental in many of the new developments in rods, reels and jigs which help popularise this new Japanese style jigging. Traditionally big fish are landed with heavy tackle. The experience is usually a combination of fighting both the fish and the tackle thus reducing the enjoyment of the sport. Being masters of invention, the Japanese tackle companies embarked on a total redesign of their blue water tackle. The results are impressive with light weight powerhouse reels combined with small powerful graphite rods. These combos not only put enjoyment back into fishing but were producing an impressive list of angling feats normally reserved for much heavier tackle.

    Tips for the first jigging trip

    * Get a good pair of split ring pliers to change jigs quickly. Proper tools are necessary to safely open the 250lb rings. Check out our Pro Hunter pliers in the accessories section.
    * Get a pouch for your pliers while you?re at it. Otherwise they will never be in their proper place ? at your side.
    * Gloves for jigging. Get past the macho attitude, it is very easy to get used to fishing with gloves. Find a pair offering good protection against braid cuts and are comfortable to wear.
    * Gimbal belt. Mandatory for fighting big fish.
    * Have replacement assist hooks pre-tied.
    * Windon leaders or leader material and tools to quickly make you own.
    * A spare jigging outfit. Or a spare reel spool filled with braid or a spare spool of braided line.
    * A range of jig types in several colours and weights.
    * Sunnies and a hat.
    * Take a camera.
    * Leave the bait at home!

    Effective jigging

    The success to any fishing trip is the ability of the skipper to put the jigger onto fish. Finding fish might simply mean looking at a screen but first the skipper must know where to look and how to give the jigger the opportunity to take advantage.

    One of the main advantages of vertical jigging is the ability to place the jig exactly where the fish are. Knowing the depth of the school, the jigger can drop the jig to the exact measured depth by using the multicoloured braided line. This line is often known as PE (Poly Ethylene or braid) line. Working the jig at a known depth is much more effective than jigging blindly.

    It is usual for large predatory fish like Yellowtail Kingfish to hang around underwater reefs and structure. Look for fish sign on the up current side of any structure. It is the skill of the skipper to position the boat up current of the structure and make allowances for current drift, windage and give sufficient drift time for the jigs to hit their mark. From here on, the skill of the jigger is what?s left to entice a hit.

    Fish will attack jigs when they are feeding, they will also attack if a baitfish appears to be injured or fleeing its presence. Other times the jigger will get a reactionary strike if jig presentation is right. Jig presentation is enhanced by working the jig with both rod and reel. The Japanese have developed such jigging techniques as ?mechanical jigging? or ?fast pitch, short jerk? to enhance the action of their highly technical jig designs. Working these particular techniques have proven to be highly effective and less tiresome than the previous ?speed jigging? that dominated during the 1980?s.


    Jigging Reels

    Some jiggers prefer overhead (multiplier or conventional) over spinning reels. For overhead reels, a narrow spool reel is preferred as line laying will not be such a problem so you can concentrate on working the jigs.

    Recommended overhead reels are:

    * Shimano ?
    o Ocea Jigger
    o Trinidad
    o Torium
    * Daiwa ?
    o Saltiga
    o Saltist
    * Accurate - Boss
    * Studio Ocean Mark ? Blue Heaven
    * Duel Speedy
    * Pro Gear Oceanus

    Recommended spinning reels are;

    * Shimano ?
    o Stella
    o Twinpower
    * Daiwa ?
    o Saltiga
    o Blast
    * Finnor
    * Van Staal
    * Accurate Twinspin

    There maybe other reels that would be worthy of inclusion but those listed reels have been popular and well proven world-wide. Most of these reels are available in NZ. Some reels are very capable while others will have some limitations to the rigours of extreme jigging.

    There is a constant misunderstanding about high gearing for jigging reels. Due to the growing numbers of jiggers exploring deeper and deeper waters, there is the need for heavier jigs and at times less streamlined jigs. A heavy jig load and the increasing fish size has made cranking with 6:1 gears plain hard work! Experienced jiggers prefer 4:1 to 5:1 ratio gears that have the torque to do the work without undue fatigue.

    A good drag system is imperative to firstly stop, then pull in big target fish. Fish such as Kingfish and Hapuka (Grouper) inhabit deep reef systems. When hooking up on these denizens, you have to stop them from running back into the reef. Similarly, hard running pelagics need suitable drag pressure to stop them. From both scenarios, poor drag performance will usually produce one result!

    Jigging Rods

    As with any type of angling, there is never one rod that will suit all occasions. A good jigging rod must be light, have a parabolic action and high strength for lifting power. Parabolic rods are easier to jig in the Japanese style, they also help the angler fight big fish and are necessary for braided line.

    Depending on the jigging style and reel type employed, rod lengths can vary. Overhead reels are best partnered with short rods, as short as 5?. Spinning reels are best with longer rods, as long as 7?. Most novice jiggers will begin with an existing longer rod, graduating into a specialist rod later. The following are simple guidelines -

    Recommended jigging rods -

    * Jigging Master*
    * Daiwa Saltiga*
    * Shimano*
    * Carpenter*
    * Smiths
    * Lamiglas Tropic Pro
    * Sevenseas
    * Fisherman
    * CB One
    * Seed
    * Calstar

    There will be many other rods that would be worthy of inclusion but these listed rods have been popular and well proven world-wide and those with an * appear here in NZ. All of the above brands have rods that are very capable for extreme jigging in both overhead and spinning models. Different target fish will require different jigging styles which may need different rod types. Ask for expert advice about rod choice to avoid a costly mistake.


    Jig types

    There are many different jig manufacturers on the market but they all produce jigs where the weight positioning is centre weighted, tail weighted or somewhere in between.

    Centre weighted jigs

    These jigs are weight balanced near its centre. This jig is designed to flutter, glide and dart during the drop but fall slower than tail weighted designs. Use this jig in shallower water and for bottom fish (Snapper) that prefer a slower, fluttery presentation. These jigs are the most common and versatile designs and are must have weapons in the jiggers arsenal.

    Zest* products in this category include, Hardy Long, Curved Slider, Ruddertail, Triangle and another brand called Sanme*


    Tail weighted jigs

    These jigs are weight balanced at or near the tail. This jig is designed to drop and lift quickly with a little action. These are the jigs to target deep water bottom fish as their streamlined designs will resist the effects of current better.

    The jigs also tend to have small face profiles for better streamlining thus reducing the jig load felt at the rod. Because they are used in deep water, most jigs tend to have luminous finishes which help illuminate this lethal offering to any prospective fish. Use these jigs to target deep water Kingfish, Hapuka and Sea Bass. Zest* products in this category include Super Deep, Deep Slim, Curved Slider and Jigging Master -Rocket

    There will be other jigs on the world market that could be included but there are so many manufacturers that it would be impractical to list them. The above jigs are very popular and successful and available in NZ.

    Jig size

    When choosing the jig size - target fish, water depth and current flow should be considered. Heavy tail weighted jigs can be used with pin point accuracy on a small target. A common guide is for 100g for every 100? of water.

    Choosing between a short or long jig might be helped by comparing jig length to the local baitfish at the time. It is also a long-held belief by Japanese jiggers that a long jig resembles a big baitfish which will entice the bigger predators! This choice then becomes a personal one or one that is determined on the day as fish will always have their daily preferences.

    Jig colour

    With a wide range of jig colours, patterns and finishes; it can be hard to choose a suitable colour. There is a long held belief that the jig colour should match the overhead light conditions i.e. dark overhead = dark coloured jig, bright sunny = bright coloured jigs. At night and during deep jigging sessions, jigs that are mostly luminous are popular because of their ability to be seen in the dark water. Often before the first drop, I will observe what colour jigs have been selected by other jiggers and then choose a different colour. This way most of the colour spectrum is covered and if there is a hot colour, then you can quickly change to that. In most cases, the prettiest jig is the one that gets tied on and we all know that you will only get bit if you have it in the water.

    Assist hooks

    One of the most significant jig developments has been the assist hook. The assist hook comprises a wide gape hook spliced to a short, looped Kevlar cord. The cord is usually looped onto the connecting end of the jig so that the hook is positioned behind the head and belly area of the jig. This is an area jiggers believe predatory fish strike which leads to improved hooksets. Another benefit is less snags because of the absence of the traditional tail treble. Many Japanese jiggers believe that predators also attack the assist hook so they often dress the hook like a flasher or fly.

    Choose an assist hook by ensuring the hook gape is wider than the jig. Jiggers often use two assist hooks, varying the cord lengths for greater coverage. Additional assist hooks can be looped in at the tail if you are getting missed strikes when the jig is dropping. The tail assist will fold up against the jig and into the strike zone but a problem is the potential of the jig to tangle with the leader if jigged too vigorously.

    There are many ways to make assist hooks, the main ingredient is Kevlar cord. Cut a 30cm length of Kevlar, double the cord then carefully tie a 2 turn uni knot or nail knot onto the hook shank then tighten with pliers. Trim off Kevlar tags and finish off with a short length of heat shrink tubing to protect the knot. Another simpler way is a single overhand knot onto the hook shank, a drop of super glue then heat shrink tubing.

    Lines

    This new Japanese style jigging could not begin without the advent of ultra thin braided line which was introduced at that time. Braided line is a must when jigging, it not only reduces drag and stretch but it enables the jigger to easily work the jig without being hampered by thick line. The thin braids drastically increase line capacity, or in reverse ? reduce the size and weight of the reels needed.

    The Japanese call these lines PE lines which is an abbreviation for Poly Ethylene being the scientific name for spectra or dyneema or simply - braid! Japanese use PE as a unit of measurement for braided line thickness, a PE5 braid is roughly equal to 50lb test. Most Japanese PE lines are characterised by colour coding where each colour measures 10m of line. There are usually 5 different colours which are repeated over the entire length of line.

    Some popular brands of PE lines ?

    * Varivas
    * YGK
    * Zenaq
    * Daiwa
    * Jig Star*
    * Salt Max*

    Leaders

    The use of leaders is important in jigging because the terminal end is exposed to reef, abrasion and bite-offs. Asian jiggers much prefer the stealthy advantages of fluorocarbon leaders since their waters have long been ravaged and the fish have become line shy.

    When considering leaders, it should be a windon with a length between

    3 ? 6m. The length is necessary because there should be at least several turns of leader on the reel when the fish comes within gaff range. This allows the leader man an easier line to handle as well as affording some abrasion resistance should the fish suddenly dive beneath the boat rubbing the line against the hull.

    There are quick and easy ways to join braid to leader but that generally does not mean they are best. Novice jiggers should begin with game fishing leaders which are joined by loop-to-loop connections. These leaders can be brought over the counter and are easily replaced but there comes a time when the complete jigger should be able to tie at least one of the elaborate connecting knots like the FG, GT, PR, Midknot. These knots are very streamlined and strong, they can withstand day-long popper casting. The bulkier uni-to-uni or bimimi-to-albright knots will suffice but fear for the rings on your rod guides.

    Check our knot section for some of these knots and links to knot tying sites.

    Jigging styles

    The are 2 basic styles in Japanese style jigging, not including other factors like speed or hesitation.

    Long stroke- working the rod from the gimbal plate. The rod is lifted in a wide arc or long stroke then dropped to allow the jig to flutter downwards to induce a strike. Simultaneously, the reel is quickly wound in 2-3 turns for each cycle. This style is best suited to centre weighted jigs, spinning combos with a longer rod.

    High pitch, short jerk ? also known as ?mechanical jigging?. The rod is carried under the armpit and the rod is stroked in a small arc. Simultaneously the reel is quickly wound in 1 turn for each cycle. This style is best suited to tail heavy streamlined jigs, overhead reels with a shorter rod.

    The above is a guide for the Japanese jig style, there are no set rules to abide so you can easily mix up the techniques and tackle to suit yourself. Certain species prefer a slower fluttery jig presentation while others prefer blistering speed. Both styles can be successfully worked at either slow or high speed or a combination of both. The attraction with jigging is the room to experiment to find what works for you.

    Early jigging ? seemed focussed on high speed. The jigs in the 1980-90?s were often short and symmetrical. High speed retrieves were needed to give those jigs action, thus the term ?speed jigging? was born. This is still a successful technique, even more so with the advent of the long jigs; but tiresome. Most jiggers of that time would be set up with long, heavy rods and large high speed reels. Monofilament was the standard line at that time. We all know just how insensitive, stretchy and bulky nylon monofilament is. The technique required the jig to be dropped to the bottom then quickly wound to the surface, this was tiresome work. A yoyo technique was for the jig to be repeatedly bounced up and down on the bottom much like a yoyo. Using mono of those times, meant that rods had to be physically long to make a long enough stroke in order to take the stretch out of the mono and move the jig.

    You can see now the advent of thin strong braids, modern tackle and technical jig designs have confined this old jigging style to the attic .

  2. #2
    I caught a fish once :) Kimberly662's Avatar
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    51
    Occupation
    Jig-a-holic
    Hmmmm...Very similiar to G-man's intro post. Informative none-the-less

  3. #3
    Cockpit Monkey In Training
    Join Date
    Nov 2006
    Posts
    38

    Jigging

    Nice concise intro.
    Just "for the record", i would like to add in a few things regarding "California-style" jigging, as practiced in Southern California and Baja since at least the late 1940's.
    It seems to be the technique the author is describing as "Early Jigging" or "Working the iron" [actually its 'Throwing the Iron'!].
    "You would do well Grasshopper, to know and combine both techniques", ha-ha!
    There are still instances where the old produces better than the new, and hybridizing allows for lots of innovation.
    In particular, the highly successful Wahoo Jigging technique as it has evolved aboard San Diego long-range boats is a hybrid.
    Back in 1990, I went with a film crew to Islamorada [Fla] to chase the amberjacks with California jigging techniques.
    We caught so many fish, that both film and radio crews came out to cover us, and we used up Bud N' Mary's Marina YEARS SUPPLY of amberjack tags in 3 days, and our trip leader won the IGFA tagging award that year.
    As we were leaving, we asked if they would start fishing jigs, and the answer was "That was interesting, but we don't fish that way here"..............
    Carry on!

  4. #4
    www.easterntackle.com Sea Draggin's Avatar
    Join Date
    Feb 2005
    Location
    Ga
    Posts
    6,629
    Best Catch
    The next bite on a jig.
    Good post TN.

    I wonder if ChrisW did this article? There was no reference to the author to credit with the work. Maybe when he sees it, he can tell us.

  5. #5
    Crab mustard is good
    Join Date
    Jul 2005
    Posts
    702
    Yes, it is ChrisW article.

    TN,
    I am sure you know that Japapnese style jigigng has been used by Panga fishermen in Baja (Sea of Cortez) way before japanese fishermen 'invented'.

  6. #6
    Cockpit Monkey In Training
    Join Date
    Nov 2006
    Posts
    38

    jigs

    Quote Originally Posted by kilsong View Post
    Yes, it is ChrisW article.

    TN,
    I am sure you know that Japapnese style jigigng has been used by Panga fishermen in Baja (Sea of Cortez) way before japanese fishermen 'invented'.

    You are exactly correct Kil.
    What is commonly called the "butterfly" retrieve these days has been called the "Mexican yo-yo Rip" for as long as I can remember.

  7. #7
    www.easterntackle.com Sea Draggin's Avatar
    Join Date
    Feb 2005
    Location
    Ga
    Posts
    6,629
    Best Catch
    The next bite on a jig.
    Quote Originally Posted by kilsong View Post
    Yes, it is ChrisW article.
    He is the man!!! I will send him a note tonight to make him aware of this reprint. I owe him some info anyway.

  8. #8
    www.easterntackle.com Sea Draggin's Avatar
    Join Date
    Feb 2005
    Location
    Ga
    Posts
    6,629
    Best Catch
    The next bite on a jig.
    This is the stuff that stands out for me.


    Quote Originally Posted by Sea Draggin View Post

    Required Multi colored line
    Knowing the depth of the school, the jigger can drop the jig to the exact measured depth by using the multicoloured braided line. Working the jig at a known depth is much more effective than jigging blindly.


    Diawa should have read this before introducing the new spinner
    There is a constant misunderstanding about high gearing for jigging reels. Due to the growing numbers of jiggers exploring deeper and deeper waters, there is the need for heavier jigs and at times less streamlined jigs. A heavy jig load and the increasing fish size has made cranking with 6:1 gears plain hard work! Experienced jiggers prefer 4:1 to 5:1 ratio gears that have the torque to do the work without undue fatigue.


    This formula works
    When choosing the jig size - target fish, water depth and current flow should be considered. A common guide is for 100g for every 100? of water.


    I do this all the time
    I will observe what colour jigs have been selected by other jiggers and then choose a different colour. This way most of the colour spectrum is covered and if there is a hot colour, then you can quickly change to that. In most cases, the prettiest jig is the one that gets tied on and we all know that you will only get bit if you have it in the water.


    Leader length
    3 - 6m. The length is necessary because there should be at least several turns of leader on the reel when the fish comes within gaff range. This allows the leader man an easier line to handle as well as affording some abrasion resistance should the fish suddenly dive beneath the boat rubbing the line against the hull.


  9. #9
    I think Admin is going to let me have this space Anders's Avatar
    Join Date
    Oct 2007
    Location
    Virginia
    Posts
    1,050
    Boat
    Wellcraft V20
    Best Catch
    125# Country Girl and a 94# Red Drum
    Occupation
    www.LibertyBricks.com
    awesome article, I could read this, gman's, and any other every 3 months to make sure i haven't forgotten anything and to keep me on top of my game

+ Reply to Thread

Content Relevant URLs by vBSEO 3.6.0 PL2