Penn reels questions?

Dads Dream · 09-01-2008, 09:51 AM

Has anyone seen this problem with Penns?

I have 4- 50 VSWs and this is their 3rd season; they are treated better than my pets at home, rinse & soapy wash after every use- oil in the rollers as necessary, etc

My problem is with the backing plate (not sure the technical term) that secures the reel seat with the anchor bolts? Out of the box, Penn provided what appears to be a black painted aluminum b-plate. And this year, you can see the paint bubbling and all the black paint is lifting and flaking off.

Bet there's a replacement upgrade out there- I think I've seen after-market machined parts...

Am I alone on this? Am I doing something wrong with washdown? Any other suggestions to proper reel washdown/ oil/ etc?

Shortfin · 09-01-2008, 10:17 AM

Sounds like the anodize is probally gettng scratched from the reel seat when you crank it down and it s now exposed to the elements , if you replace with new make sure you grease them before mounting them on the rod

babalaza · 09-01-2008, 12:17 PM

this what you about?

If so, it's not your fault, Penn has this problem. I have 50vsws from different years, the newer ones have the lighter clamp and the paint went off and the "aluminum" thingy started to get ugly. Replace it with custom golden ones and It will look purty.

If that's not what you talking about, sorry just gettin up

Dads Dream · 09-02-2008, 03:51 PM

Quote:

Originally Posted by babalaza

this what you about?

If so, it's not your fault, Penn has this problem. I have 50vsws from different years, the newer ones have the lighter clamp and the paint went off and the "aluminum" thingy started to get ugly. Replace it with custom golden ones and It will look purty.

Bingo!! That's exactly it!!

Thanks - seems to be a mfg/design thing....cuz I know take of the gear

Thanks for the feedback & suggestion!

Fishfinder · 09-02-2008, 09:22 PM

You think that the reel seat is a problem, wait until your 2 speen gear locks up because the c-clip that holds the 2 speed gear in place comes off, or the water intrusion that comes throught the cam and shaft rusts you main shaft bearing shut. I work on reels and have for the last 20 years. Unfortunately Penn forsake their old bullet proof TW series reels for these P.O.S. V series reel is beyond me. They have had nothing but problems since they have come out. The new V series 80's especially have a problem with the c-clips coming off the 2 speed gear and the V series 70s have the major water intrusion in the cam and shaft to rust up the bearings. Boy I wish they would s**t can these reels and go back to the old TW series. Yes, they were heavier and didn't look as space age as the new ones, but they always worked, and could be easily fixed. Now Penn is starting to discontinue some of the older reel parts! Is't that lovely? that was one of the last things that you could always say about Penn. You could always get parts for them. Well, not any more!

Capt. Joe Shute

Dads Dream · 09-05-2008, 09:32 PM

Quote:

Originally Posted by Fishfinder

I work on reels and have for the last 20 years. Unfortunately Penn forsake their old bullet proof TW series reels for these P.O.S. V series reel is beyond me. They have had nothing but problems since they have come out. Boy I wish they would s**t can these reels and go back to the old TW series.

Capt. Joe Shute

**Capt Joe
Got any good news for me? Geez- never heard this B4 about the VSW~ I guess fortunately for me- my rods have never seen any burning line and screaming drags yet- only soapy water & fresh onshore rinse-downs

I also picked up 2- 30 TWs last year on that special sale they ran in '07~ are those gonna STB too, eventually.

Seriously though, I'm cruising the internet looking for those nice machined aluminum (above replacement for 'reel seat enforcement')~ can't find anything yet.

Anyone else out there know where to find replacement parts like above pic?

ReelSmith · 09-27-2008, 01:17 PM

Try CHARKBAIT, they have a variety of aftermarket items...also do a search on ebay, there is a gentleman that makes and sells aftermarket items too...sorry I don't remember his name...

http://www.charkbait.com/cs/csrStrikeMaster.htm

hdmcgatha · 10-06-2008, 02:13 AM

I have the same problem with my V30's and V50's I was thinking about send them in and have them powder coated???

eyefish2good · 10-06-2008, 08:30 AM

Sounds like overseas production at it's finest!

livetofishnj · 10-07-2008, 05:27 PM

It's a sad thing to have to replace a stock part with something aftermarket because of manufacturing deficiencies, but the machined gold ones do look sweet!

Joe any maintenance tips to keep that from happening, like replacing the c-clips at some interval?

09-01-2008, 09:51 AM	#1
Dads Dream Stop staring at my Avatar. Join Date: Mar 2008 Posts: 387 Credits: 1,841.3 Boat: Sea Pro 22 Home Port: Eliot, Maine Best Catch: Ummm, yes, we lost him....after 10 hrs, 5 min- Oct 5, 2008~ it was worth the battle Occupation: 9-5, at a desk	Penn reels questions? Has anyone seen this problem with Penns? I have 4- 50 VSWs and this is their 3rd season; they are treated better than my pets at home, rinse & soapy wash after every use- oil in the rollers as necessary, etc My problem is with the backing plate (not sure the technical term) that secures the reel seat with the anchor bolts? Out of the box, Penn provided what appears to be a black painted aluminum b-plate. And this year, you can see the paint bubbling and all the black paint is lifting and flaking off. Bet there's a replacement upgrade out there- I think I've seen after-market machined parts... Am I alone on this? Am I doing something wrong with washdown? Any other suggestions to proper reel washdown/ oil/ etc? __________________ Capt Rich

09-01-2008, 10:17 AM	#2
Shortfin Stop staring at my Avatar. Join Date: Jan 2008 Location: Newton Ma Posts: 395 Credits: 1,595.6 Boat: 18 Edgewater Home Port: Falmouth Best Catch: Grander Blue Marlin/203 Big Eye Occupation: Sales Rep	Sounds like the anodize is probally gettng scratched from the reel seat when you crank it down and it s now exposed to the elements , if you replace with new make sure you grease them before mounting them on the rod __________________ Manufacturers rep for the highest quality machine parts made in America

09-02-2008, 09:22 PM	#5
Fishfinder Anthony's Ark is a blowboater Join Date: Dec 2006 Posts: 324 Credits: 1,821.6	You think that the reel seat is a problem, wait until your 2 speen gear locks up because the c-clip that holds the 2 speed gear in place comes off, or the water intrusion that comes throught the cam and shaft rusts you main shaft bearing shut. I work on reels and have for the last 20 years. Unfortunately Penn forsake their old bullet proof TW series reels for these P.O.S. V series reel is beyond me. They have had nothing but problems since they have come out. The new V series 80's especially have a problem with the c-clips coming off the 2 speed gear and the V series 70s have the major water intrusion in the cam and shaft to rust up the bearings. Boy I wish they would s**t can these reels and go back to the old TW series. Yes, they were heavier and didn't look as space age as the new ones, but they always worked, and could be easily fixed. Now Penn is starting to discontinue some of the older reel parts! Is't that lovely? that was one of the last things that you could always say about Penn. You could always get parts for them. Well, not any more! Capt. Joe Shute __________________ www.captjoes.com Atlantic Beach, NC (800) 868-0941 captjoesinfo@yahoo.com

09-27-2008, 01:17 PM	#7
ReelSmith Hide- My Wifes Logged On Join Date: Feb 2007 Posts: 163 Credits: 5,421.7	Try CHARKBAIT, they have a variety of aftermarket items...also do a search on ebay, there is a gentleman that makes and sells aftermarket items too...sorry I don't remember his name... http://www.charkbait.com/cs/csrStrikeMaster.htm __________________ REELSMITH - REEL REPAIRS AND SERVICES. . OLD SALTY PLANERS. . THUMBDINGER. . OFFSHORE INNOVATIONS Catch'em Up!!! Ralph Chesapeake Bay & Ocean City, Maryland

10-06-2008, 02:13 AM	#8
hdmcgatha Master Baiter Join Date: Oct 2008 Location: Chalong,Phuket, Thailand Posts: 47 Credits: 349.0 Boat: THAIONEON Home Port: Chalong Bay, Phuket, Thailand Best Catch: hehehe... WOW!! Occupation: Offshore / Fishing	I have the same problem with my V30's and V50's I was thinking about send them in and have them powder coated??? __________________ Tight Lines Dan www.thaisportfishing.com +66 848 498633 or 084 8498633 (Local)

10-06-2008, 08:30 AM	#9
eyefish2good #1 Croaker Hunter Join Date: Sep 2008 Location: I live in S, Florida for over 20 years. Posts: 102 Credits: 665.4 Home Port: Port everglades Best Catch: 43 permit - 73 black grouper- 24 mutton snapper Occupation: I work at various boat and fishing shows around the USA selling my line of custom lures	Sounds like overseas production at it's finest! __________________ Owner of TamerProducts.net Makers of fine offshore lures, cutomized gear, and terminal tackle.

10-07-2008, 05:27 PM	#10
livetofishnj Crab mustard is good Join Date: Aug 2006 Location: Matawan, NJ Posts: 605 Credits: 10,636.1 Home Port: Raritan Bay Best Catch: 650# Blue Marlin Occupation: Managing Editor-Sportfishermen.com Blog Entries: 1	It's a sad thing to have to replace a stock part with something aftermarket because of manufacturing deficiencies, but the machined gold ones do look sweet! Joe any maintenance tips to keep that from happening, like replacing the c-clips at some interval? __________________ Bryan Rose Want to write, travel and continue to build this great site? Let me know. Have a great business that needs exposure, a new product for the fishing market or questions about advertising? -I'm here to help. Email bryan@sportfishermen.com and I'll help answer your questions about becoming part of the Sportfishermen.com family.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode