What planer for BFT? - Page 2

stew · 05-16-2008, 10:03 AM

Your 6/0' s will not be able to handled anything much bigger than a 6-8oz planer max. because your drags won't be able to hold them. Those weights will not get you very deep at 4-5 knots. With the currents out east it will really vary your depths on the planer. We run a much bigger/heavier planers and we run them off of an 80w rigged in-line. But you can still use them just buy a lighter planer and you should be able to get down 20 feet or so. We stock a wide range of planers from 4oz to 32oz. Good luck. Capt. Eric

secret hahba · 05-16-2008, 12:18 PM

Quote:

Originally Posted by chumtini

Welcome SH. Where exactly is the Secret Hahbah?

secret hahba! is located between scituate and ply

iguana1 · 05-16-2008, 04:28 PM

Stew

Thanks for the info. If I decide to run planers in-line I have two choices. Shimano 50wlrs with 5'6" stand up rods or Shimano 130 Bent Butt 7' giant rigs.

Ideas on what will work with what are appreciated.

Are there real downsides to in-line?

dunn6253 · 05-16-2008, 06:33 PM

From my understanding, you really need the drag of at least an 80 to get the full benefit of the planer system. If you have a 130 at your disposal, then I would use the 130 as a dedicated planer rod and just attach the 50 line with a rubber band to the planer line, which would be the bait/lure line. Wahoonbox has some good videos of this in the video section, I will see if I can dig them up. This is just what I would do, as I wouldn't let a 130 sit around doing nothing.

05-16-2008, 10:03 AM	#11
stew Yep, your gonna need stitches Join Date: Oct 2006 Location: Cape Cod Posts: 86 Credits: 528.0 Boat: Tammy Rose Home Port: Chatham, MA Best Catch: The real "Tammy Rose" Occupation: Boat Capt.	Your 6/0' s will not be able to handled anything much bigger than a 6-8oz planer max. because your drags won't be able to hold them. Those weights will not get you very deep at 4-5 knots. With the currents out east it will really vary your depths on the planer. We run a much bigger/heavier planers and we run them off of an 80w rigged in-line. But you can still use them just buy a lighter planer and you should be able to get down 20 feet or so. We stock a wide range of planers from 4oz to 32oz. Good luck. Capt. Eric __________________ "It's All About The Bite!" www.thehookupcapecod.comCheckout our new On-line store!

05-16-2008, 06:33 PM	#14
dunn6253 Sit down Shut up And fish Join Date: Sep 2007 Location: Quincy, MA Posts: 467 Credits: 368.4	From my understanding, you really need the drag of at least an 80 to get the full benefit of the planer system. If you have a 130 at your disposal, then I would use the 130 as a dedicated planer rod and just attach the 50 line with a rubber band to the planer line, which would be the bait/lure line. Wahoonbox has some good videos of this in the video section, I will see if I can dig them up. This is just what I would do, as I wouldn't let a 130 sit around doing nothing. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-16-2008, 04:28 PM	#13
iguana1 Anthony's Ark is a blowboater Join Date: Oct 2006 Posts: 254 Credits: 597.3	Stew Thanks for the info. If I decide to run planers in-line I have two choices. Shimano 50wlrs with 5'6" stand up rods or Shimano 130 Bent Butt 7' giant rigs. Ideas on what will work with what are appreciated. Are there real downsides to in-line?