By User SharkJP

Here is a fun winter project. Do you use a lot of spreader bars? I know they are a pain to keep organized. Well, you could always buy a bag from Adrenaline Lures or you can use this little tip.

Go to home depot and buy a 40" piece of PVC tubing. The diameter can be as thick as you want, but i would not use less than 3" or the bars can be tough to get in and out. Take the PVC and drill holes throughout (i use a 1/8 bit) just enough to drain the water that might get in there. Already you have an inexpensive and durable way to store your bars. If you are very creative, you can mount them somewhere in your cabin or console and you have a permanent storage area.

Now, if you dont plan to take them too and from the boat, you can put a little sling on them. The most important thing with the sling or hand is that it must be centered on the tube or when you carry it you will keep getting smacked in the knees. . .

this time, just drill two 1/2" holes evenly spaced and centered. Take a rope and thread into the holes, tie a small knot on the inside as a stopper and there you go!

One thing to remember, if you do tie the knot, make sure that you do not store your hook baits in with the bar because they can get caught on the knot, epecially if you are trying to get the bar in or out quickly. If they get stuck past the barb, you are going to have one hell of a time getting them free.

Ill post some pics of mine after thanksgiving and give exact measurements. These really do work great. One of the best things about them, in my opinion, is that they are very durable. With the bags, someone can sit on them and bend the bar, or SLEEP on one and tear up the bar. . .LONG STORY

Hope this helps guys,

Until next time. . .